Wrap Care

Infrequent or improper maintenance of your wrapped vehicle can lead to premature degradation of graphics and lower the expected life of the film.  Here are some tips on getting the most out of your investment.

CLEANING TIPS

Waterless Wash

If the vehicle is not overly dirty, this is the preferred method.  Hand wash extremely dirty vehicles first and follow up with a waterless wash.  Waterless wash products can help maintain the gloss level and performance of the film.  Before using any new product on your wrap, be sure to test them in an inconspicuous area of the vehicle.

Hand Wash

This is ideal for a vehicle with dirt or other residue.  Follow the below steps:

1) Pre rinse.  Using a hose, rinse the whole wrap with clean water.  THis helps to remove the loose dirt particles and helps avoid scratching the graphics.

2) Wash:  Gently wash the vehicle with a mild soapy water solution using a soft cloth or a synthetic or natural sponge.  Start from the top of the vehicle and work down.  Avoid abrading the surface with unnecessary scrubbing.

3) Rinse:  Rinse thoroughly with clean water.

4) Dry: Let the wrap dry naturally.  To avoid water spotting, use a silicone squeegee to remove water then finish drying with a microfiber or soft, non abrasive towel.

Note Excessive spraying at the wrong angle may create failure points and result in the wrap lifting at the edges.

An automatic car wash that uses brushes is not recommended.  Brushes may scratch the wrap or catch the wrap's edge and create a failure point.  Automatic brushless car washes are also not recommended as the high pressure water could also cause failure points at the wrap's edge.

Next: Wrap Care FAQs. 

(Care instructions are referenced or copied from Avery Dennison's care instructions hanger.)